Intermittent static in PC speakers
Moderators: Bakhtosh, EvilHomer3k
- Holman
- Posts: 28987
- Joined: Sun Oct 24, 2004 8:00 pm
- Location: Between the Schuylkill and the Wissahickon
Intermittent static in PC speakers
I've got a pair of plain old Logitech desktop speakers plugged into the back of my PC (at the green port or whatever), and they occasionally go all staticky even when no sound is coming from the machine. It's not constant. Sometimes I'll go all day without hearing it, then the next day it will be back. Obviously it goes away when the speakers aren't turned on.
I don't believe it's the speakers failing, as these are newish and they give very good sound. In fact I've noticed this problem with a different pair of speakers on this same PC, and I also recall sometimes having the same problem on other computers I've had.
I believe the problem might actually have to do with interaction among all the wires behind the machine: sound cables, power cables, keyboard, mouse, monitor, router, etc. It seems like I've sometimes been able to make the static go away for a day just by trying to rearrange all the wires, but I've never been able to isolate which ones (if any) are actually causing the static when they come into proximity. (Is this a false impression? Do wires do this?) In any case, the static eventually comes back.
Another possibility I've considered is that maybe fan vibration is transferring through the desk surface to the speakers, but I haven't had any success cushioning the speakers from vibration.
Anyway, I suspect this must be a common problem, and I wonder if there is a common solution. Does anyone have any suggestions?
Thanks!
I don't believe it's the speakers failing, as these are newish and they give very good sound. In fact I've noticed this problem with a different pair of speakers on this same PC, and I also recall sometimes having the same problem on other computers I've had.
I believe the problem might actually have to do with interaction among all the wires behind the machine: sound cables, power cables, keyboard, mouse, monitor, router, etc. It seems like I've sometimes been able to make the static go away for a day just by trying to rearrange all the wires, but I've never been able to isolate which ones (if any) are actually causing the static when they come into proximity. (Is this a false impression? Do wires do this?) In any case, the static eventually comes back.
Another possibility I've considered is that maybe fan vibration is transferring through the desk surface to the speakers, but I haven't had any success cushioning the speakers from vibration.
Anyway, I suspect this must be a common problem, and I wonder if there is a common solution. Does anyone have any suggestions?
Thanks!
Much prefer my Nazis Nuremberged.
- Isgrimnur
- Posts: 82290
- Joined: Sun Oct 15, 2006 12:29 am
- Location: Chookity pok
- Contact:
Re: Intermittent static in PC speakers
Wiggle the wires. There may be a short if they've been bent.
It's almost as if people are the problem.
- Anonymous Bosch
- Posts: 10514
- Joined: Thu Oct 14, 2004 6:09 pm
- Location: Northern California [originally from the UK]
Re: Intermittent static in PC speakers
I'd also suggest checking the cables, particularly if you have a sizeable jumble behind your system. In that case, your speaker static may well be caused by electrical interference. So be sure to check that your speaker wires aren't running across any power cables (or any other cables for that matter). Desktop lamps can also cause interference, so make sure lamp wires are also kept well out of the way.
"There is only one basic human right, the right to do as you damn well please. And with it comes the only basic human duty, the duty to take the consequences." — P. J. O'Rourke
- Smoove_B
- Posts: 54709
- Joined: Wed Oct 13, 2004 12:58 am
- Location: Kaer Morhen
Re: Intermittent static in PC speakers
You're not tuned into Channel Z, are you? That's one for the older crowd.
At one point I had a 5.1 surround sound system for my PC and was having an issue. It apparently was a ground loop and I was never able to fix it. I wouldn't describe it as "static", it was more of a buzz.
At one point I had a 5.1 surround sound system for my PC and was having an issue. It apparently was a ground loop and I was never able to fix it. I wouldn't describe it as "static", it was more of a buzz.
Maybe next year, maybe no go
-
- Posts: 1545
- Joined: Tue Feb 28, 2006 3:24 am
Re: Intermittent static in PC speakers
Right click the volume control in the system tray and click "Playback Devices". Select "Speakers" and then click the Properties button. Navigate over to the "Levels" tab and then mute all of the Input channels (Rear Blue In, Rear Green In, et cetera).
This turned my speakers from a hissing, squealing, static-filled mess into the very pinnacle of silence. Of course I have to re-enable them whenever I want to use my inputs (I have a guitar amp plugged into one and my Blu-ray player plugged into another).
This turned my speakers from a hissing, squealing, static-filled mess into the very pinnacle of silence. Of course I have to re-enable them whenever I want to use my inputs (I have a guitar amp plugged into one and my Blu-ray player plugged into another).
- Isgrimnur
- Posts: 82290
- Joined: Sun Oct 15, 2006 12:29 am
- Location: Chookity pok
- Contact:
Re: Intermittent static in PC speakers
1989 is for the older crowd? ... Damn it.Smoove_B wrote:You're not tuned into Channel Z, are you? That's one for the older crowd.
It's almost as if people are the problem.
- Holman
- Posts: 28987
- Joined: Sun Oct 24, 2004 8:00 pm
- Location: Between the Schuylkill and the Wissahickon
Re: Intermittent static in PC speakers
Thanks everyone for this good advice! I'll get on it today.
Channel Z? There was a time when I wanted to be Fred Schneider.
Channel Z? There was a time when I wanted to be Fred Schneider.
Much prefer my Nazis Nuremberged.
- GreenGoo
- Posts: 42336
- Joined: Thu Oct 14, 2004 10:46 pm
- Location: Ottawa, ON
Re: Intermittent static in PC speakers
While not specific to your problem, it's pretty common for dust to accumulate and when adjusting the volume (assuming a physical knob on the speaker) have significant static bursts. You can "clean" the contacts by twisting the knob back and forth multiple times.
This static typically only shows up when you turn the knob though.
This static typically only shows up when you turn the knob though.
- Holman
- Posts: 28987
- Joined: Sun Oct 24, 2004 8:00 pm
- Location: Between the Schuylkill and the Wissahickon
Re: Intermittent static in PC speakers
Well I tried one thing, and for the past few hours I've heard no static. Tracing my wires, I realized that back when I set up the machine I rolled up the speaker wire to shorten it, bending it around itself several times and securing it with a twist tie (the way these things usually come out of the box). I thought it would be nice to control wire clutter and keep things neat.
This morning I got rid of the twist tie and let the wire hand straight and free down the back of the desk. No noticeable static since.
This morning I got rid of the twist tie and let the wire hand straight and free down the back of the desk. No noticeable static since.
Much prefer my Nazis Nuremberged.
- hitbyambulance
- Posts: 10261
- Joined: Wed Oct 13, 2004 3:51 am
- Location: Map Ref 47.6°N 122.35°W
- Contact:
Re: Intermittent static in PC speakers
you were making your own antenna there. or inductorHolman wrote:Well I tried one thing, and for the past few hours I've heard no static. Tracing my wires, I realized that back when I set up the machine I rolled up the speaker wire to shorten it, bending it around itself several times and securing it with a twist tie (the way these things usually come out of the box). I thought it would be nice to control wire clutter and keep things neat.
This morning I got rid of the twist tie and let the wire hand straight and free down the back of the desk. No noticeable static since.
- GreenGoo
- Posts: 42336
- Joined: Thu Oct 14, 2004 10:46 pm
- Location: Ottawa, ON
Re: Intermittent static in PC speakers
And a nice little magnetic field.
If the wire was shielded you wouldn't have had this problem, obviously.
If the wire was shielded you wouldn't have had this problem, obviously.