*Updated!* Anyone ever build a gaming board? *Board built!

All discussions regarding Board, Card, and RPG Gaming, including industry discussion, that don't belong in one of the other gaming forums.

Moderators: The Preacher, $iljanus, Zaxxon

Post Reply
User avatar
Blackhawk
Posts: 43491
Joined: Tue Oct 12, 2004 9:48 pm
Location: Southwest Indiana

*Updated!* Anyone ever build a gaming board? *Board built!

Post by Blackhawk »

A friend and I are looking to build a gaming board (a table top that sits on top of an existing table.) It'll be for wargaming, board gaming, and RPGs. I'm thinking a pair of 4' x 4' square sections that could be used separately as a 4' x 4' table, or put together for a 4' x 8'. I've got a pair of beat up night stands (probably 18" x 14" that I'll be using as pedestal style legs. We've used them that way before, borrowing my kids' old Thomas the Tank Engine table board (which is about 4 1/2' x 3 1/2'), and it works beautifully.

Space is at a premium here. I have absolutely no room to add a permanent structure to my house, which is why I'm going with boards instead of an actual table. I need to store them in a corner of the house behind some totes when they're not in use.

No suggesting a Sultan, please. I'm trying to keep expense at a minimum. That means building it myself. I'm not a carpenter. I can measure and cut right angles, and I can hammer nails, but that's about it. I've been looking into the options, and am finding that I don't know enough about the materials. What I've considered or read about:

1) A 4x8 foot piece of thick plywood (3/4" or 1") cut into 4' x 4' sections and framed with 2x4s, with a way to lock them together into a single piece.

2) Same as above, but instead of nailing the top to the square frames, move the 2x4s out and add a 2x2 lip on the inside, allowing the table tops to be lifted out. It would be more complicated to build, but would add versatility (potentially four separate paint jobs on the boards, flipping them depending on the game being played.)

3) Same as either of the above, but with particle board or MDF for the top instead of plywood. Price, sturdiness, smoothness of the surface and weight would all be factors as to which we'd used.

4) A thin sheet of masonite glued (?) to a thinner frame in two 4' x 4' sections. I don't know a thing about masonite, including cost, durability, or how much of a frame would be necessary to add stability to a thin sheet of it, but the thing here is that it would be lighter and easier to handle and store than the 2x4s with heavy plywood.

I need to make this thing without fancy tools or carpentry experience, and a cheaply as possible, but I don't want to spend the time and money on something that is going to either break after a month, be so wobbly that it turns or tips every time someone walks through the room, or be so big and heavy that I can't get it out without hiring movers.

Has anyone ever attempted such a project, or have any experience with the materials? Are any of these a bad approach, and which would suit our purposes best?
Last edited by Blackhawk on Tue Apr 10, 2012 12:53 pm, edited 1 time in total.
(˙pǝsɹǝʌǝɹ uǝǝq sɐɥ ʎʇıʌɐɹƃ ʃɐuosɹǝd ʎW)
User avatar
hentzau
Posts: 15092
Joined: Thu Oct 21, 2004 11:06 am
Location: Castle Zenda, Ruritania

Re: Anyone ever build a gaming table/board?

Post by hentzau »

I've only built one table, and that's a 4x8 monster that sits in my basement on an old cafeteria table. Big and heavy. So I've never made a segmented table like what you are talking about.

The main advice that I can give you (from my experience) is don't put a lip on the edge of the plywood. I attached 1x2" strips to the edges of my table to keep the dice from rolling off. While it did do that, it was basically a major annoyance when sitting down at the table to play a boardgame and you were going to rest your arms on the table.
“We can never allow Murania to become desecrated by the presence of surface people. Our lives are serene, our minds are superior, our accomplishments greater. Gene Autry must be captured!!!” - Queen Tika, The Phantom Empire
User avatar
Chaosraven
Posts: 20235
Joined: Tue Jul 26, 2005 2:26 am

Re: Anyone ever build a gaming table/board?

Post by Chaosraven »

hentzau wrote:The main advice that I can give you (from my experience) is don't put a lip on the edge of the plywood.
And tables with lip also keep you from sweeping the cards off the table (when you are having trouble picking them up)
"Where are you off to?"
"I don't know," Snufkin replied.
The door shut again and Snufkin entered his forest, with a hundred miles of silence ahead of him.

Sweet sweet meat come. -LordMortis
User avatar
Anonymous Bosch
Posts: 10512
Joined: Thu Oct 14, 2004 6:09 pm
Location: Northern California [originally from the UK]

Re: Anyone ever build a gaming table/board?

Post by Anonymous Bosch »

I have a friend who constructed a portable folding gaming table on the cheap by simply hinging two Home Depot interior wooden door slabs together. Since the door slabs are made from hollow plywood, it's actually pretty light and easy for him to fold away and carry, despite the fact that it folds out to ~4ft x 6ft. I believe he spent less than $50 on the entire project.
"There is only one basic human right, the right to do as you damn well please. And with it comes the only basic human duty, the duty to take the consequences." — P. J. O'Rourke
User avatar
The Meal
Posts: 27987
Joined: Tue Oct 12, 2004 10:33 pm
Location: 2005 Stanley Cup Champion

Re: Anyone ever build a gaming table/board?

Post by The Meal »

I frequent a poker forum that has many posts from amateur hobbyists who put together their own poker tables. They can run for as little as $200 (though the typical build is $400-$1000). Many of these tables also double for use in playing traditional board- and wargames.

There are many features which a dedicated gaming table would share with these tables (including removable/folding legs for storage). There is a ton of design experience shared in those threads. The standard design certainly violates one of the major precepts listed in this thread (no lip because of comfort and to ease in card removal) though the same design feature is considered a benefit in the case of those tables' intended design purpose. (The elevated rail on a poker table is padded with foam and covered with vinyl for maintenance-free comfort. The surface upon which the cards are removed has a slight padding to it as well to enable ease in lifting of cards — certainly not nearly so much padding that one wouldn't be able to stand up figurines or roll dice however.)

Poker tables are traditionally built as ovals since the standard case has a dedicated dealer at one position (along the flat edge), but tables built for home game use can also be done as circles (56" is the maximum diameter which it is agreed-upon that all parties involved can reach the center of the table, but 60" tables aren't unheard of for those wanting to squeeze 8+ players around).

I can link to design experiences if you think it'd be valuable. If this doesn't sound appealing, then I won't dig up the posts.
"Better to talk to people than communicate via tweet." — Elontra
User avatar
Blackhawk
Posts: 43491
Joined: Tue Oct 12, 2004 9:48 pm
Location: Southwest Indiana

Re: Anyone ever build a gaming table/board?

Post by Blackhawk »

Yeah, I'm not making a sand table, and I'm not using modular terrain, so a lip wouldn't be of much use. All I really need is a nice, smooth flat surface that won't tip over when someone bumps it or leans over to write on it. It doesn't even need to be pretty.

Meal, I don't plan on making that elaborate of a design (and as a former casino security guy, I'm pretty familiar with poker tables.) At most, the top will be plain wood with a layer of paint, and the 'legs' will be two end tables pulled out to the center of the floor for me to set the boards on.

I'm mostly looking for feedback on the basic materials and design. For instance: would a 1/4", four foot square masonite sheet with a 1x2 wood frame (something like this, but square) be sturdy and solid enough to stay flat and not get knocked around when someone bumps it.
(˙pǝsɹǝʌǝɹ uǝǝq sɐɥ ʎʇıʌɐɹƃ ʃɐuosɹǝd ʎW)
User avatar
Chaosraven
Posts: 20235
Joined: Tue Jul 26, 2005 2:26 am

Re: Anyone ever build a gaming table/board?

Post by Chaosraven »

Blackhawk wrote:Yeah, I'm not making a sand table, and I'm not using modular terrain, so a lip wouldn't be of much use. All I really need is a nice, smooth flat surface that won't tip over when someone bumps it or leans over to write on it. It doesn't even need to be pretty.

Meal, I don't plan on making that elaborate of a design (and as a former casino security guy, I'm pretty familiar with poker tables.) At most, the top will be plain wood with a layer of paint, and the 'legs' will be two end tables pulled out to the center of the floor for me to set the boards on.

I'm mostly looking for feedback on the basic materials and design. For instance: would a 1/4", four foot square masonite sheet with a 1x2 wood frame (something like this, but square) be sturdy and solid enough to stay flat and not get knocked around when someone bumps it.
Velcro, baby
"Where are you off to?"
"I don't know," Snufkin replied.
The door shut again and Snufkin entered his forest, with a hundred miles of silence ahead of him.

Sweet sweet meat come. -LordMortis
User avatar
Tommy20
Posts: 295
Joined: Sat Feb 28, 2009 1:08 am
Location: Stalag 13

Re: Anyone ever build a gaming table/board?

Post by Tommy20 »

Just saw this tonight:

http://regelndeskrieges.blogspot.com/" target="_blank
User avatar
hentzau
Posts: 15092
Joined: Thu Oct 21, 2004 11:06 am
Location: Castle Zenda, Ruritania

Re: Anyone ever build a gaming table/board?

Post by hentzau »

Tommy20 wrote:Just saw this tonight:

http://regelndeskrieges.blogspot.com/" target="_blank
That's actually pretty cool...
“We can never allow Murania to become desecrated by the presence of surface people. Our lives are serene, our minds are superior, our accomplishments greater. Gene Autry must be captured!!!” - Queen Tika, The Phantom Empire
User avatar
Blackhawk
Posts: 43491
Joined: Tue Oct 12, 2004 9:48 pm
Location: Southwest Indiana

Re: Anyone ever build a gaming table/board?

Post by Blackhawk »

Nice table, lucky *#(!@.
(˙pǝsɹǝʌǝɹ uǝǝq sɐɥ ʎʇıʌɐɹƃ ʃɐuosɹǝd ʎW)
User avatar
LawBeefaroni
Forum Moderator
Posts: 55316
Joined: Fri Oct 15, 2004 3:08 pm
Location: Urbs in Horto, outrageous taxes on everything

Re: Anyone ever build a gaming table/board?

Post by LawBeefaroni »

My first instinct would be to get some slab doors and join them up with a set of detachable hinges. Or I bet there are locking mechanisms made specifically for joining table-top leaves or similar. You could mount these on the bottom side.

You can get unfinished slab doors in "wood" or masonite for under $30 each, depending on size. Examples. I don't know if they get up to 48" but maybe a 36"x80" cut in half? If you do cut them in half, you'd need to do it carefully and put some support in at the cut as most are hollow. But a 36"X80" interior door is very light and can probably be stowed along the wall pretty easily without cutting it.

Or maybe two 24"x80" doors with the hinges.
" Hey OP, listen to my advice alright." -Tha General
"No scientific discovery is named after its original discoverer." -Stigler's Law of Eponymy, discovered by Robert K. Merton

MYT
User avatar
Anonymous Bosch
Posts: 10512
Joined: Thu Oct 14, 2004 6:09 pm
Location: Northern California [originally from the UK]

Re: Anyone ever build a gaming table/board?

Post by Anonymous Bosch »

LawBeefaroni wrote:Or maybe two 24"x80" doors with the hinges.
That's exactly what my friend used. Works great, though I recall him saying that it took a bit of experimentation before he found the correct type of hinges, i.e. something that would allow the door slabs to fold out completely snug, without leaving any gap in the middle. I believe he found some piano hinges that did the trick.
"There is only one basic human right, the right to do as you damn well please. And with it comes the only basic human duty, the duty to take the consequences." — P. J. O'Rourke
User avatar
Boudreaux
Posts: 2816
Joined: Fri Oct 15, 2004 12:18 am
Location: St. Louis

Re: Anyone ever build a gaming table/board?

Post by Boudreaux »

Blackhawk wrote:I'm mostly looking for feedback on the basic materials and design. For instance: would a 1/4", four foot square masonite sheet with a 1x2 wood frame (something like this, but square) be sturdy and solid enough to stay flat and not get knocked around when someone bumps it.
The example in this photo is a great approach. I'd build this simple 1x2 frame and screw or nail a 4x4 sheet of 1/8" MDF to it. That should be plenty sturdy enough when laid flat, and the frame will help add a little weight to it.

For a few dollars more, get a couple of sheets of heavy green or brown felt. Stretch them over the top surface, wrap around underneath and either hot glue or staple it to the frame. When I made a Halloween costume for my son, I think I bought a 3'x6' sheet of brown felt for something like $3.

If you build two, you could also attach a couple of draw latches to either side of the two frames, and then lay them on top of the tables and latch them together for added stablility.
User avatar
Blackhawk
Posts: 43491
Joined: Tue Oct 12, 2004 9:48 pm
Location: Southwest Indiana

Re: Anyone ever build a gaming table/board?

Post by Blackhawk »

Boudreaux wrote: For a few dollars more, get a couple of sheets of heavy green or brown felt. Stretch them over the top surface, wrap around underneath and either hot glue or staple it to the frame. When I made a Halloween costume for my son, I think I bought a 3'x6' sheet of brown felt for something like $3.

If you build two, you could also attach a couple of draw latches to either side of the two frames, and then lay them on top of the tables and latch them together for added stablility.
I had thought about felt/cloth/toweling/flocking it, but I also want to be able to write on the surface if I'm playing a P&P RPG. That's why I'll either leave it natural (depending on its color) or paint it a deep, dark green and varnish it.

As to hooking them together, I'd considered setting the 1x2s on the connecting ends upright instead of laying them down and drilling some 1/4" holes between them. When we need both halves we just set them upright and stick three bolts in, slap on some large washers, turn some wing nuts and are good to go. A lot of the time we'll only need one - Warlord is our wargame of choice right now, and it uses a 4x4 field, plus most board games would be fine on 4x4.

The door option: I'll take a look at that. It sounds like a good idea, depending on the cost and making the hinges work.
(˙pǝsɹǝʌǝɹ uǝǝq sɐɥ ʎʇıʌɐɹƃ ʃɐuosɹǝd ʎW)
User avatar
Smoove_B
Posts: 54567
Joined: Wed Oct 13, 2004 12:58 am
Location: Kaer Morhen

Re: Anyone ever build a gaming table/board?

Post by Smoove_B »

I've been using folding tables that seem to more or less work for what we do. Every now and again we do have to use plywood as a base for Heroscape boards, but that's usually the exception. Not related really, but I do applaud your efforts. I think we'd also benefit from a wider table and it had occurred to me that I could build "drop over" table extender thingy ( technical name) in the spirit of what you're trying to create.

I picked up a dice tray because I don't have the skill to make one and it's worked out great for us. I glued two dowels together as a divider if we have to share the space for team play. It cuts down on the noise and keeps the dice on the table, which is the goal.
Maybe next year, maybe no go
User avatar
Blackhawk
Posts: 43491
Joined: Tue Oct 12, 2004 9:48 pm
Location: Southwest Indiana

Re: Anyone ever build a gaming table/board?

Post by Blackhawk »

We've been using the coffee table, or the coffee table with the Thomas board on it for a while. It works for most board games, but it really isn't big enough for wargaming. Warlord specifies a 4x4 table, and most others I've played do in the range of 4x6.

Role playing games are worse - we have to drag every flat surface in the house out and cluster them together, which is very inconvenient. The idea of having the dice, characters, maps, and minis all on the same surface is very appealing.
(˙pǝsɹǝʌǝɹ uǝǝq sɐɥ ʎʇıʌɐɹƃ ʃɐuosɹǝd ʎW)
User avatar
Bad Demographic
Posts: 7772
Joined: Wed Oct 13, 2004 9:21 am
Location: Las Cruces, NM

Re: Anyone ever build a gaming table/board?

Post by Bad Demographic »

For what it's worth, if you want to be able to draw/write on the surface, Rustoleum makes a paint that acts like a dry-erase surface. I've never talked to anybody who has used it so I don't know how good it really is or how long it lasts.

http://www.rustoleum.com/CBGProduct.asp?pid=128
"Those who can make you believe absurdities can make you commit atrocities." Voltaire

Black Lives Matter
User avatar
Blackhawk
Posts: 43491
Joined: Tue Oct 12, 2004 9:48 pm
Location: Southwest Indiana

Re: Anyone ever build a gaming table/board?

Post by Blackhawk »

Bad Demographic wrote:For what it's worth, if you want to be able to draw/write on the surface, Rustoleum makes a paint that acts like a dry-erase surface. I've never talked to anybody who has used it so I don't know how good it really is or how long it lasts.

http://www.rustoleum.com/CBGProduct.asp?pid=128
Damn, I could do my whole house.
(˙pǝsɹǝʌǝɹ uǝǝq sɐɥ ʎʇıʌɐɹƃ ʃɐuosɹǝd ʎW)
BrooKlYNGuY
Posts: 2
Joined: Sat Mar 17, 2012 9:50 am

Re: Anyone ever build a gaming table/board?

Post by BrooKlYNGuY »

[quote="Tommy20"]Just saw this tonight:


I agree..it's one of the nicest 8-) pretty cool. Need to do something like this soon.
User avatar
Blackhawk
Posts: 43491
Joined: Tue Oct 12, 2004 9:48 pm
Location: Southwest Indiana

Re: Anyone ever build a gaming table/board?

Post by Blackhawk »

Anonymous Bosch wrote:
LawBeefaroni wrote:Or maybe two 24"x80" doors with the hinges.
That's exactly what my friend used. Works great, though I recall him saying that it took a bit of experimentation before he found the correct type of hinges, i.e. something that would allow the door slabs to fold out completely snug, without leaving any gap in the middle. I believe he found some piano hinges that did the trick.
This is exactly what we ended up doing. Two 20x80 door sections with piano hinges. The doors themselves were only $20 each. Here are some photos. Click to embiggen:

Folded

Enlarge Image

Open, showing the hinges

Enlarge Image

Fully open

Enlarge Image

My new gaming group met the other day for the first time, and it worked beautifully. We just threw some non-slip cloth on the coffee table, laid it on top and played.

Now, though, I need one more piece of advice:

These things are raw wood, unsealed and unfinished. For someone with zero woodworking experience or tools, what would be the easiest and cheapest way to get these things sealed ready for regular use? This time we had to make everybody keep their drinks on the floor as any moisture would just get sucked into the wood. Should we paint the thing with latex wall paint? Stain it and and use some sort of varnish? Just varnish? We want it to make a nice, smooth writing surface (which it currently does), but not have to worry about chips and peeling.
(˙pǝsɹǝʌǝɹ uǝǝq sɐɥ ʎʇıʌɐɹƃ ʃɐuosɹǝd ʎW)
User avatar
Smoove_B
Posts: 54567
Joined: Wed Oct 13, 2004 12:58 am
Location: Kaer Morhen

Re: *Updated!* Anyone ever build a gaming board? *Board bu

Post by Smoove_B »

Painting it with a semi-gloss latex paint (the stuff you'd use for kitchens or bathrooms) is probably the cheapest, easiest and safest (in terms of dealing with fumes associated with wood stains). The semi-gloss would allow you to wipe it clean with a sponge if you spill Cheetos or mountain dew all over it.

That's pretty crafty though. Plus, if you're going to bug-in for a zombie attack, that could work as a first-line window barricade.
Maybe next year, maybe no go
User avatar
LawBeefaroni
Forum Moderator
Posts: 55316
Joined: Fri Oct 15, 2004 3:08 pm
Location: Urbs in Horto, outrageous taxes on everything

Re: *Updated!* Anyone ever build a gaming board? *Board bu

Post by LawBeefaroni »

Nice!

For finishing them, I'd check with the manufacturer. If they're like the slab doors I've seen, they're not exactly standard wood (lauan?).

If info isn't available, and if it were me, I'd start with a coat of sanding sealer. Then sand it and see how it is. If it needs more protection, paint it with some kind of enamel paint.

I'd also do a test application of the sealer and/or paint on a small part of the bottom before doing the whole gaming surface.
" Hey OP, listen to my advice alright." -Tha General
"No scientific discovery is named after its original discoverer." -Stigler's Law of Eponymy, discovered by Robert K. Merton

MYT
User avatar
Blackhawk
Posts: 43491
Joined: Tue Oct 12, 2004 9:48 pm
Location: Southwest Indiana

Re: *Updated!* Anyone ever build a gaming board? *Board bu

Post by Blackhawk »

LawBeefaroni wrote:Nice!

For finishing them, I'd check with the manufacturer. If they're like the slab doors I've seen, they're not exactly standard wood (lauan?).

If info isn't available, and if it were me, I'd start with a coat of sanding sealer. Then sand it and see how it is. If it needs more protection, paint it with some kind of enamel paint.
I have no idea who made the doors. There was a sticker on them, but that went away days ago. As to the rest - A) does this sanding process require anything more than grabbing a handful of sandpaper and rubbing back and forth, or does it involve special equipment? and B) is the result sufficiently protected that should someone, say, spill a drink or set a wet glass on the thing for an hour that it wouldn't be harmed? Honestly, other than occasionally pounding a nail, I haven't done even the most rudimentary work with wood.
(˙pǝsɹǝʌǝɹ uǝǝq sɐɥ ʎʇıʌɐɹƃ ʃɐuosɹǝd ʎW)
User avatar
Boudreaux
Posts: 2816
Joined: Fri Oct 15, 2004 12:18 am
Location: St. Louis

Re: *Updated!* Anyone ever build a gaming board? *Board bu

Post by Boudreaux »

As far as protection, are you worried about physical damage to the wood, or just cosmetic marks and stains?

For the easiest and cheapest I'm with Smoove, a semi-gloss latex paint is probably easiest. A gallon of paint in your favorite color plus a disposable foam roller or two will run you about $25. Two or three coats of paint and it'd be protected for years.
User avatar
LawBeefaroni
Forum Moderator
Posts: 55316
Joined: Fri Oct 15, 2004 3:08 pm
Location: Urbs in Horto, outrageous taxes on everything

Re: *Updated!* Anyone ever build a gaming board? *Board bu

Post by LawBeefaroni »

Blackhawk wrote:
I have no idea who made the doors. There was a sticker on them, but that went away days ago. As to the rest - A) does this sanding process require anything more than grabbing a handful of sandpaper and rubbing back and forth, or does it involve special equipment? and B) is the result sufficiently protected that should someone, say, spill a drink or set a wet glass on the thing for an hour that it wouldn't be harmed? Honestly, other than occasionally pounding a nail, I haven't done even the most rudimentary work with wood.
The sanding sealer seals up porous woods. The unfinished surface of a slab door is usually pretty porous.

A) All you need is sanding sealer (AKA seal coat, etc) and some sand paper and a good arm. There are brush on and spray on versions, I prefer the brush on. Apply the sealer and then sand per instructions on the sealer. Usually a 120 grit or so sandpaper will work. What you're doing is filling in the porous areas and then sanding to smooth it. After that you should be able to apply primer/paint without any problems.

B) Depends on what kind you get. Honestly I've always painted or stained afterwards so I'm not sure but I think it should protect it from glass sweat and the occasional spill. Still, I'd say varnish or paint over the sealer. Sanding sealer isn't technically a finish. Just make sure that the sealer you get is compatible with the finish you get.

Again, as always, test it on the back of the table/doors to see how you like it.
" Hey OP, listen to my advice alright." -Tha General
"No scientific discovery is named after its original discoverer." -Stigler's Law of Eponymy, discovered by Robert K. Merton

MYT
User avatar
Freezer-TPF-
Posts: 12698
Joined: Wed Oct 13, 2004 2:41 pm
Location: VA

Re: *Updated!* Anyone ever build a gaming board? *Board bu

Post by Freezer-TPF- »

Low effort solution: Just get some decent coasters for your drinks. :)
When the sun goes out, we'll have eight minutes to live.
User avatar
KiloOhm
Posts: 2380
Joined: Fri Oct 15, 2004 7:07 pm
Location: MA

Re: *Updated!* Anyone ever build a gaming board? *Board bu

Post by KiloOhm »

Polyeurethane that thing! Cheap, and if you apply several thin coats with some light sanding it will be very smooth and stain resistant (almost imprevious really) plus hard as hell. You can stain it first if you like.
Xbox360 Gamertag: Lord Polish
Steam: LordPolish
WoW (Durotan): Valstaff (Mage), Kankle (Warrior) - inactive
Eve: Meticulus - Miner Supreme! - Inactive
User avatar
Blackhawk
Posts: 43491
Joined: Tue Oct 12, 2004 9:48 pm
Location: Southwest Indiana

Re: *Updated!* Anyone ever build a gaming board? *Board bu

Post by Blackhawk »

Sand it and then paint it, or paint it and then sand it?
(˙pǝsɹǝʌǝɹ uǝǝq sɐɥ ʎʇıʌɐɹƃ ʃɐuosɹǝd ʎW)
User avatar
LawBeefaroni
Forum Moderator
Posts: 55316
Joined: Fri Oct 15, 2004 3:08 pm
Location: Urbs in Horto, outrageous taxes on everything

Re: *Updated!* Anyone ever build a gaming board? *Board bu

Post by LawBeefaroni »

1. Sanding sealer (if you want it)
2. Sand
3. Clean (remove dust)
4. Paint

If you're doing polyeurethane:
1. Sand
2. Clean (remove dust)
3. Apply polyeurethane
4. Sand any blemishes if necessary
4b. Polish if sanded
" Hey OP, listen to my advice alright." -Tha General
"No scientific discovery is named after its original discoverer." -Stigler's Law of Eponymy, discovered by Robert K. Merton

MYT
User avatar
silverjon
Posts: 10781
Joined: Wed Mar 12, 2008 7:16 pm
Location: Western Canuckistan

Re: *Updated!* Anyone ever build a gaming board? *Board bu

Post by silverjon »

Also sand lightly and remove dust (tack cloth) between coats if doing multiple coats. You need to scratch up the smooth finish to get multiple coats of sealant or paint to stick properly.
wot?

To be fair, adolescent power fantasy tripe is way easier to write than absurd existential horror, and every community has got to start somewhere... right?

Unless one loses a precious thing, he will never know its true value. A little light finally scratches the darkness; it lets the exhausted one face his shattered dream and realize his path cannot be walked. Can man live happily without embracing his wounded heart?
Post Reply