Home Projects (upkeep/repair/mods/cool sh*t/advice/question)

Everything else!

Moderators: Bakhtosh, EvilHomer3k

Post Reply
User avatar
Zarathud
Posts: 16433
Joined: Fri Oct 15, 2004 10:29 pm
Location: Chicago, Illinois

Re: Home Projects (upkeep/repair/mods/cool sh*t/advice/question)

Post by Zarathud »

If you're going to sell, spend the cash. It's not worth possibly losing a sale after failing a radon inspection.

The only benefit of home ownership is you have the choice of fixing it. A renter doesn't. While you can move when you rent, that's much easier when you don't have 30+ years of crap to haul with you.
"If the facts don't fit the theory, change the facts." - Albert Einstein
"I don't stand by anything." - Trump
“Bad men need nothing more to compass their ends, than that good men should look on and do nothing.” - John Stuart Mill, Inaugural Address Delivered to the University of St Andrews, 2/1/1867
“It is the impractical things in this tumultuous hell-scape of a world that matter most. A book, a name, chicken soup. They help us remember that, even in our darkest hour, life is still to be savored.” - Poe, Altered Carbon
User avatar
Smoove_B
Posts: 54567
Joined: Wed Oct 13, 2004 12:58 am
Location: Kaer Morhen

Re: Home Projects (upkeep/repair/mods/cool sh*t/advice/question)

Post by Smoove_B »

mori wrote: Fri Jan 11, 2019 11:15 pmFor a Jersey boy you seem naive in the dark arts. Don't you know somebody that knows somebody?
Yeah, I know people. But my connections in братва aren't helpful with radon. :D
Zarathud wrote: Sat Jan 12, 2019 5:48 am If you're going to sell, spend the cash. It's not worth possibly losing a sale after failing a radon inspection.
That's the rub. Our house (without the system running) does not have a radon level in excess of what is required for mitigation. The law only requires a working system if you're above a certain level. However, I can see it coming up during the sale and yeah, I'd rather have it not be an issue. The last time we moved the buyers required us to repair two window screens in order to close. I still hate their guts, but it's apparently a different market out there now - home prices are such that people are not (collectively) being a-holes over the things that were a "problem" in 2007.
Maybe next year, maybe no go
User avatar
Isgrimnur
Posts: 82085
Joined: Sun Oct 15, 2006 12:29 am
Location: Chookity pok
Contact:

Re: Home Projects (upkeep/repair/mods/cool sh*t/advice/question)

Post by Isgrimnur »

Isgrimnur wrote:On Saturday, I will be replacing the bathtub faucet in the 2nd bathroom, as the shower diverter leaks. This, of course, was only discovered once the wife and I started using that one because the master bath is leaking water into my closet.
Got sick last weekend. Just finished installing the faucet. Water retention when the diverted is much improved.
It's almost as if people are the problem.
User avatar
Smoove_B
Posts: 54567
Joined: Wed Oct 13, 2004 12:58 am
Location: Kaer Morhen

Re: Home Projects (upkeep/repair/mods/cool sh*t/advice/question)

Post by Smoove_B »

So the cable that pulls the drive chain on my garage door opener snapped last week. In moving it manually, it was coming down all janky and stiff, so I thought for sure I was going to need a new door assembly. Fortunately there's a garage door specialist in the area (who knew?) and they were happy to come out and give it all a look-see. I talked to the guy for like 30 minutes all about garage doors and garage door operations. While simple, they're not nearly as maintenance-free as I thought they would be. Granted, it's been ~12 years since we moved in and I've literally done nothing for the garage doors, but the prior advice I was given (white lithium grease) is apparently completely and totally wrong. Instead, all that's needed is 3 in 1 oil (ask your grandpa), applied at least once a year (maybe more, depending on your manufacturer's guidelines) to the rollers and hinges. The springs are good for anywhere between 6-10,000 cycles (depends on where they are made), but other than that there's not much to them.

Anyway, it was only a couple hundred dollars to get a tune-up on two garage doors, so I'd recommend finding a local outfit if you have one to do the same evaluation. Failing that, get some 3-in-1 and have at it.
Maybe next year, maybe no go
User avatar
msteelers
Posts: 7157
Joined: Sun Oct 17, 2004 9:30 pm
Location: Port Saint Lucie, Florida
Contact:

Re: Home Projects (upkeep/repair/mods/cool sh*t/advice/question)

Post by msteelers »

I'm looking into getting into voice over and voice acting work, which means I need to make a good spot to record in my home. I don't have any closet that is set up to work out of, which is a popular option for people just starting out. I also can't afford to drop $5K on a whisper room. So I'm going to need to make something. I thought about making a 4-foot square booth out of PVC pipe and wrapping it with acoustic sound blankets. But I'm afraid that's not going to give me a good professional sound. Plus, the blankets are surprisingly expensive. I think I can make a wooden booth, treat it with better sound absorption material than the blankets, and have a completely professional sound for just a little bit more money.

This is going to be a disaster. I can't wait. :D
User avatar
stimpy
Posts: 6102
Joined: Wed Jan 19, 2005 6:04 pm

Re: Home Projects (upkeep/repair/mods/cool sh*t/advice/question)

Post by stimpy »

msteelers wrote: Fri Feb 22, 2019 11:43 am I'm looking into getting into voice over and voice acting work, which means I need to make a good spot to record in my home. I don't have any closet that is set up to work out of, which is a popular option for people just starting out. I also can't afford to drop $5K on a whisper room. So I'm going to need to make something. I thought about making a 4-foot square booth out of PVC pipe and wrapping it with acoustic sound blankets. But I'm afraid that's not going to give me a good professional sound. Plus, the blankets are surprisingly expensive. I think I can make a wooden booth, treat it with better sound absorption material than the blankets, and have a completely professional sound for just a little bit more money.

This is going to be a disaster. I can't wait. :D
Ooooooo........can you upload some recordings of you saying "syllabus, syllabus, testing 123" over and over so we can judge your voice over talents?
He/Him/His/Porcupine
User avatar
Isgrimnur
Posts: 82085
Joined: Sun Oct 15, 2006 12:29 am
Location: Chookity pok
Contact:

Re: Home Projects (upkeep/repair/mods/cool sh*t/advice/question)

Post by Isgrimnur »

Amazon

48 Pack Acoustic Panels Studio Foam Wedges 1" X 12" X 12"
Price: $59.97 & FREE Shipping
It's almost as if people are the problem.
User avatar
stessier
Posts: 29816
Joined: Tue Dec 21, 2004 12:30 pm
Location: SC

Re: Home Projects (upkeep/repair/mods/cool sh*t/advice/question)

Post by stessier »

I am not what most people would consider handy, but in the last 2 weeks I replaced 4 light switches (1x 2-pole, 2x 3-pole, and 1x 4-pole), upgraded to a programmable thermostat, and changed out our garbage disposal. I'm fairly proud of this accomplishment. :)

The thermostat was by far the easiest with the only complication that who ever installed the original cut a hole wayyyyy bigger than needed. I was fortunate the new one covered up their mess, but just barely.

I have 3 of the 4 light switches correct. The fourth - even though I transferred the wires exactly from the original - still doesn't work with all the connected switches. I hope to finally finish that this weekend (it's in a darker part of the house, so I can't work on it when I get home at night).

The garbage disposal wasn't nearly as bad as I feared. Took about 2 hours. I probably could have done it faster, but took things very slow to make sure I didn't mess it up and flood the kitchen. The new one is much quieter and comes with a 5 year warranty where they will come out and replace it for me. It's been installed for nearly a week and I think we've used it once. Of course we wanted to use it every day while I was waiting to replace it... :doh:
I require a reminder as to why raining arcane destruction is not an appropriate response to all of life's indignities. - Vaarsuvius
Global Steam Wishmaslist Tracking
Running____2014: 1300.55 miles____2015: 2036.13 miles____2016: 1012.75 miles____2017: 1105.82 miles____2018: 1318.91 miles__2019: 2000.00 miles
User avatar
Isgrimnur
Posts: 82085
Joined: Sun Oct 15, 2006 12:29 am
Location: Chookity pok
Contact:

Re: Home Projects (upkeep/repair/mods/cool sh*t/advice/question)

Post by Isgrimnur »

stessier wrote: Fri Feb 22, 2019 4:51 pm (it's in a darker part of the house, so I can't work on it when I get home at night).
Just move your Gillette Stadium Lighthouse Lamp over there.
It's almost as if people are the problem.
User avatar
stessier
Posts: 29816
Joined: Tue Dec 21, 2004 12:30 pm
Location: SC

Re: Home Projects (upkeep/repair/mods/cool sh*t/advice/question)

Post by stessier »

Isgrimnur wrote: Fri Feb 22, 2019 4:57 pm
stessier wrote: Fri Feb 22, 2019 4:51 pm (it's in a darker part of the house, so I can't work on it when I get home at night).
Just move your Gillette Stadium Lighthouse Lamp over there.
I tried that, but it ended up reflecting off the six Lombardi trophies giving it a disco ball effect that was super distracting.
I require a reminder as to why raining arcane destruction is not an appropriate response to all of life's indignities. - Vaarsuvius
Global Steam Wishmaslist Tracking
Running____2014: 1300.55 miles____2015: 2036.13 miles____2016: 1012.75 miles____2017: 1105.82 miles____2018: 1318.91 miles__2019: 2000.00 miles
User avatar
Kraken
Posts: 43688
Joined: Tue Oct 12, 2004 11:59 pm
Location: The Hub of the Universe
Contact:

Re: Home Projects (upkeep/repair/mods/cool sh*t/advice/question)

Post by Kraken »

I bungled some switches the last time I tried to replace them and we have lived with the consequences ever since. I swore off trying to do electrical work forever. If the government doesn't take all of our money in April, I'm finally going to hire an electrician to bring us into the 21st century.
User avatar
mori
Posts: 4589
Joined: Sat Dec 11, 2004 11:53 pm
Location: Edge of Darkness

Re: Home Projects (upkeep/repair/mods/cool sh*t/advice/question)

Post by mori »

My water heater stopped working today. I can light the pilot light but it will not stay lit. I see a bunch of complaints online about the control box on the heater. I will try one of their suggested fixes tomorrow. Maybe blowing myself and the house to hell. I will probably end up taking a few whore showers in the future if it is not a simple fix.
User avatar
mori
Posts: 4589
Joined: Sat Dec 11, 2004 11:53 pm
Location: Edge of Darkness

Re: Home Projects (upkeep/repair/mods/cool sh*t/advice/question)

Post by mori »

I got the hot water heater to work by following the instructions in one of the Youtube videos on the subject. I did have to jumper the overheat switch so it is not safe. I will just heat up the water so I can at least take a shower, then hook it up the way it is suppose to be and see if it will work as designed. If not I will have to call a repairman on Monday as it seems they will not sell those valves to any honyock on the street.
User avatar
Kraken
Posts: 43688
Joined: Tue Oct 12, 2004 11:59 pm
Location: The Hub of the Universe
Contact:

Re: Home Projects (upkeep/repair/mods/cool sh*t/advice/question)

Post by Kraken »

Now there's a word I haven't heard since I was a child. My mom often used "honyock" as a mild insult, as for a bad driver. I need to revive that word. :)
User avatar
mori
Posts: 4589
Joined: Sat Dec 11, 2004 11:53 pm
Location: Edge of Darkness

Re: Home Projects (upkeep/repair/mods/cool sh*t/advice/question)

Post by mori »

I hooked up the controller like it is suppose to be with all the safety functions enabled, it seems to be working for the time being.
Last edited by mori on Sat Feb 23, 2019 7:28 pm, edited 1 time in total.
User avatar
mori
Posts: 4589
Joined: Sat Dec 11, 2004 11:53 pm
Location: Edge of Darkness

Re: Home Projects (upkeep/repair/mods/cool sh*t/advice/question)

Post by mori »

Kraken wrote: Sat Feb 23, 2019 12:36 pm Now there's a word I haven't heard since I was a child. My mom often used "honyock" as a mild insult, as for a bad driver. I need to revive that word. :)
The word is used in the Midwest although not that often. It is as an insult without being profane.
User avatar
Smoove_B
Posts: 54567
Joined: Wed Oct 13, 2004 12:58 am
Location: Kaer Morhen

Re: Home Projects (upkeep/repair/mods/cool sh*t/advice/question)

Post by Smoove_B »

You'd think by using a name like "American Standard" it would be easy to find replacement parts. However, that's not the case when your toilet bowl is "classic" style and hasn't been produced since the early 1980s. For reasons unclear, different gasket sizes/styles are now used to join the tank to the base and the gasket I need is no longer something that's easily obtainable.

And that's the story of how the simple painting two bathrooms (requiring the removal of said tanks and discovering the gaskets were shot) resulted in full toilet replacement. Seriously, f home upkeep/repair. When someone tells you it's easy or there's nothing that's a potential problem, know that it really means something annoying is lurking in the shadows.

Also, f the prior home owner for wallpapering the bathrooms.
Maybe next year, maybe no go
User avatar
Blackhawk
Posts: 43490
Joined: Tue Oct 12, 2004 9:48 pm
Location: Southwest Indiana

Re: Home Projects (upkeep/repair/mods/cool sh*t/advice/question)

Post by Blackhawk »

I'm entirely ignorant of carpentry/home-fixing, and so on. I need some quick advice. I'm going to link to a set of shelf brackets. Included are some screws and some anchors, pictured. I have old, old plaster walls (not drywall.) Are these what I need? I'll have to borrow a drill and a level to mount them, but I want to make sure I'm not getting the wrong thing, and I have zero experience.

Here's the link.
(˙pǝsɹǝʌǝɹ uǝǝq sɐɥ ʎʇıʌɐɹƃ ʃɐuosɹǝd ʎW)
User avatar
TheMix
Posts: 10903
Joined: Thu Oct 14, 2004 5:19 pm
Location: Broomfield, Colorado

Re: Home Projects (upkeep/repair/mods/cool sh*t/advice/question)

Post by TheMix »

When we were having the addition built, my contractor recommended these. Or ones very much like them. They come in a variety of strengths. They have the advantages of 1) not being plastic and 2) not requiring pre-drilling. Though I did find that with drywall it helps to pre-drill at times.

You can use your drill to screw in the ancors and then the screws. Very handy. I would "assume" that they would work in plaster as well, though you may want to do some reading. I'd also think for plaster you'd definitely want to pre-drill to reduce the chances of splintering/flaking.

Edit: Looks like those may not be as useful for plaster. You may want plastic ones that expand instead. Check out: https://www.thisoldhouse.com/ideas/choo ... r-fastener. They cover plaster walls as well.

Black Lives Matter

Isgrimnur - Facebook makes you hate your friends and family. LinkedIn makes you hate you co-workers. NextDoor makes you hate your neighbors.
User avatar
Smoove_B
Posts: 54567
Joined: Wed Oct 13, 2004 12:58 am
Location: Kaer Morhen

Re: Home Projects (upkeep/repair/mods/cool sh*t/advice/question)

Post by Smoove_B »

I wouldn't make any assumptions about plaster. I lived in a home with plaster walls and I remember it being a nightmare, mainly related to the plaster cracking while trying to hang things. I'm going to guess you want to anchor that shelf into a stud (using some minimally destructive way to drill pilot holes) and if you can't find a stud, there will likely be some type of special hardware for mounting shelving to plaster. Or maybe you weld it. I'm also bad with upkeep/repair/mods.
Maybe next year, maybe no go
User avatar
Blackhawk
Posts: 43490
Joined: Tue Oct 12, 2004 9:48 pm
Location: Southwest Indiana

Re: Home Projects (upkeep/repair/mods/cool sh*t/advice/question)

Post by Blackhawk »

I know that plaster requires special types of hardware, I'm just not sure if the hardware that is included is the right kind. This house was built around 1890, and as far as I know, still has the original walls. The plaster is dry as bone and crumbles with any sort nail or screw. I really wish I could hire someone, but that's beyond our means. Our over-toilet bathroom shelves (the only towel storage in the house) are broken and have been for years, but now they're broken to the point of near failure. The shelves are actually V-shaped now. Our bathroom is tiny (like you have to walk sideways to get from the tub to the toilet tiny.) Over the toilet is the only available wall, and the pre-made toilet shelving you can buy won't work because the sides are too close to the walls.

I have a strong feeling that our bathroom was originally built as a storage closet or pantry and was only converted into a bathroom many decades later when the upstairs and downstairs were converted into separate 'apartments', I'm guessing sometime in the 30s or 40s.
(˙pǝsɹǝʌǝɹ uǝǝq sɐɥ ʎʇıʌɐɹƃ ʃɐuosɹǝd ʎW)
User avatar
Kraken
Posts: 43688
Joined: Tue Oct 12, 2004 11:59 pm
Location: The Hub of the Universe
Contact:

Re: Home Projects (upkeep/repair/mods/cool sh*t/advice/question)

Post by Kraken »

You might be able to locate the studs by tapping along the wall. The sound will change when you find something solid. (Or you can use a stud finder, which magnetically detects nails in the studs). Definitely better to nail into the studs if those shelves will be carrying any weight. If you still aren't sure, drilling small pilot holes is the way to go.
User avatar
Smoove_B
Posts: 54567
Joined: Wed Oct 13, 2004 12:58 am
Location: Kaer Morhen

Re: Home Projects (upkeep/repair/mods/cool sh*t/advice/question)

Post by Smoove_B »

Hmmm. Somehow what I wrote wasn't there...or maybe I just wrote it in my mind and needed more coffee.

Other than screws in the photo that you'd use to anchor into a stud, those plastic anchors are for drywall and I wouldn't presume to use them on plaster. I don't know if they make equivalent plaster anchors; I have a hard time believing they do. I think the only practical solution is to find studs and hope their spacing is matched to the mounting brackets provided on the shelf. I seem to remember that being a problem for us as well in the house we lived in from the early 1900s - there was irregular stud spacing so finding them was even a problem because you couldn't use accepted current conventions for construction to guess where they were using a door frame or electrical outlet.
Maybe next year, maybe no go
User avatar
em2nought
Posts: 5306
Joined: Fri Oct 15, 2004 5:48 am

Re: Home Projects (upkeep/repair/mods/cool sh*t/advice/question)

Post by em2nought »

If you can't find the studs, then toggles are probably the way to go if there's going to be weight on those shelves
https://homeguides.sfgate.com/use-wall- ... 23838.html
Enlarge Image
You have to make big holes for toggles which isn't the most appealing idea though.
Technically, he shouldn't be here.
User avatar
Blackhawk
Posts: 43490
Joined: Tue Oct 12, 2004 9:48 pm
Location: Southwest Indiana

Re: Home Projects (upkeep/repair/mods/cool sh*t/advice/question)

Post by Blackhawk »

I'll likely have to go that route.
Kraken wrote: Tue Apr 16, 2019 11:54 am You might be able to locate the studs by tapping along the wall. The sound will change when you find something solid. (Or you can use a stud finder, which magnetically detects nails in the studs). Definitely better to nail into the studs if those shelves will be carrying any weight. If you still aren't sure, drilling small pilot holes is the way to go.
Tapping on the walls sounds roughly like tapping on solid rock. When I've needed to find studs in the past, I've had to use bucky balls and hope that they nailed the slats to the studs. Still, given that the section is only about three feet wide and is next to a corner, I don't know that the studs will be practical anyway.
(˙pǝsɹǝʌǝɹ uǝǝq sɐɥ ʎʇıʌɐɹƃ ʃɐuosɹǝd ʎW)
User avatar
Jaymon
Posts: 3006
Joined: Wed Sep 10, 2008 12:51 pm

Re: Home Projects (upkeep/repair/mods/cool sh*t/advice/question)

Post by Jaymon »

If you have a plaster wall, you are in trouble. Regular stud finders don't work. You can use a magnetic stud finder thats will find the nails, BUT some plaster walls are built using a metal mesh background, so even that may not work.

Without a stud, you will need the anchors. But the little plastic jobs that are for sheetrock are no good. You will need the larger anchors that are specifically suitable for plaster, you will need to drill a big hole to get it pushed through. And, the screws are going to need washers on your side of the wall. Rather than me describing it, go ahead and youtube it, plenty of well made stuff showing how to get it sorted out.


Have you considered one of these freestanding shelfs that fit behind and over the toilet? I know you said not much room, but some of them come in a narrow size, this one here is only 20 inches wide.

Bunnies like beer because its made from hops.
User avatar
Montag
Posts: 2810
Joined: Wed Nov 03, 2004 2:14 pm
Location: Indianapolis

Re: Home Projects (upkeep/repair/mods/cool sh*t/advice/question)

Post by Montag »

Did some caulking for reals on removing and replacing some around the shower, tub, and sink. Not too difficult to do. Was more work getting the old stuff out than putting new stuff in.
words
User avatar
Blackhawk
Posts: 43490
Joined: Tue Oct 12, 2004 9:48 pm
Location: Southwest Indiana

Re: Home Projects (upkeep/repair/mods/cool sh*t/advice/question)

Post by Blackhawk »

Jaymon wrote: Mon Apr 22, 2019 11:33 am

Have you considered one of these freestanding shelfs that fit behind and over the toilet? I know you said not much room, but some of them come in a narrow size, this one here is only 20 inches wide.

Most of them have two problems: First, they're not deep enough. This is the towel and washcloth storage for a family of four. It has to be wide enough and deep enough to hold a double stack of bath towels. Second, the sides aren't adjustable. The problem isn't total width, it is the sides. There is less than half an inch between the side of the back of the toilet and the wall next to it where the legs of the stand go. At the bottom of that wall is a half inch strip. One side reaches the floor, the other side can't, and the strip itself isn't big enough to hold it steady.
(˙pǝsɹǝʌǝɹ uǝǝq sɐɥ ʎʇıʌɐɹƃ ʃɐuosɹǝd ʎW)
User avatar
Zarathud
Posts: 16433
Joined: Fri Oct 15, 2004 10:29 pm
Location: Chicago, Illinois

Re: Home Projects (upkeep/repair/mods/cool sh*t/advice/question)

Post by Zarathud »

Sounds like a woodworking project for a shelving unit. Custom depth and width.
"If the facts don't fit the theory, change the facts." - Albert Einstein
"I don't stand by anything." - Trump
“Bad men need nothing more to compass their ends, than that good men should look on and do nothing.” - John Stuart Mill, Inaugural Address Delivered to the University of St Andrews, 2/1/1867
“It is the impractical things in this tumultuous hell-scape of a world that matter most. A book, a name, chicken soup. They help us remember that, even in our darkest hour, life is still to be savored.” - Poe, Altered Carbon
User avatar
Blackhawk
Posts: 43490
Joined: Tue Oct 12, 2004 9:48 pm
Location: Southwest Indiana

Re: Home Projects (upkeep/repair/mods/cool sh*t/advice/question)

Post by Blackhawk »

Blackhawk wrote: Tue Apr 16, 2019 10:28 am I'm entirely ignorant of carpentry/home-fixing, and so on. I need some quick advice. I'm going to link to a set of shelf brackets. Included are some screws and some anchors, pictured. I have old, old plaster walls (not drywall.) Are these what I need? I'll have to borrow a drill and a level to mount them, but I want to make sure I'm not getting the wrong thing, and I have zero experience.

Here's the link.
Ugh. I bought these, and now I need the shelves to go on them. The area I'm mounting them is 29" across, so I figure 26-28" shelves.

Shelf boards seem to only come in two lengths: 24 inches or 300 feet. And it turns out that Lowe's and Menard's don't cut wood to size like they used to - they'll only cut it to fit in your car. :grund:
(˙pǝsɹǝʌǝɹ uǝǝq sɐɥ ʎʇıʌɐɹƃ ʃɐuosɹǝd ʎW)
User avatar
RMC
Posts: 6739
Joined: Wed Oct 13, 2004 1:49 pm
Location: Elyria, Ohio
Contact:

Re: Home Projects (upkeep/repair/mods/cool sh*t/advice/question)

Post by RMC »

Blackhawk wrote: Wed Jun 05, 2019 12:04 pm
Blackhawk wrote: Tue Apr 16, 2019 10:28 am I'm entirely ignorant of carpentry/home-fixing, and so on. I need some quick advice. I'm going to link to a set of shelf brackets. Included are some screws and some anchors, pictured. I have old, old plaster walls (not drywall.) Are these what I need? I'll have to borrow a drill and a level to mount them, but I want to make sure I'm not getting the wrong thing, and I have zero experience.

Here's the link.
Ugh. I bought these, and now I need the shelves to go on them. The area I'm mounting them is 29" across, so I figure 26-28" shelves.

Shelf boards seem to only come in two lengths: 24 inches or 300 feet. And it turns out that Lowe's and Menard's don't cut wood to size like they used to - they'll only cut it to fit in your car. :grund:
I am pretty sure Home Depot will cut to size. Also, smaller(non big box stores) lumber yards will usually cut to size, see if you have some in your area. If you want to drive to Grafton, Ohio, I have the tools and can cut it for you. But that might be a long drive for just a few cuts. :)
Difficulties mastered are opportunities won. - Winston Churchill
Sheesh, this is one small box. Thankfully, everything's packed in nicely this time. Not too tight nor too loose (someone's sig in 3, 2, ...). - Hepcat
User avatar
Blackhawk
Posts: 43490
Joined: Tue Oct 12, 2004 9:48 pm
Location: Southwest Indiana

Re: Home Projects (upkeep/repair/mods/cool sh*t/advice/question)

Post by Blackhawk »

We have a Menard's and a Lowe's in Terre Haute. The local store shut down years ago. No Home Despot.
(˙pǝsɹǝʌǝɹ uǝǝq sɐɥ ʎʇıʌɐɹƃ ʃɐuosɹǝd ʎW)
User avatar
Blackhawk
Posts: 43490
Joined: Tue Oct 12, 2004 9:48 pm
Location: Southwest Indiana

Re: Home Projects (upkeep/repair/mods/cool sh*t/advice/question)

Post by Blackhawk »

FWIW, I have other options. I was mostly just venting at how much of a pain this stuff is if you don't already have a well-stocked workshop. With no drill and no saw, this has become a hassle.
(˙pǝsɹǝʌǝɹ uǝǝq sɐɥ ʎʇıʌɐɹƃ ʃɐuosɹǝd ʎW)
User avatar
ImLawBoy
Forum Admin
Posts: 14950
Joined: Tue Oct 12, 2004 9:49 pm
Location: Chicago, IL
Contact:

Re: Home Projects (upkeep/repair/mods/cool sh*t/advice/question)

Post by ImLawBoy »

My next door neighbor is a stereotype defying single mother with a fully stocked garage workshop. She's always got one project or another going on - usually making something for her 4 year old daughter. She's very generous with letting us use her equipment on those rare occasions when I try to do something handy.

Sadly, I know that this is not very helpful for BH (unless he's also got neighbors he hasn't tapped into yet).
That's my purse! I don't know you!
User avatar
Blackhawk
Posts: 43490
Joined: Tue Oct 12, 2004 9:48 pm
Location: Southwest Indiana

Re: Home Projects (upkeep/repair/mods/cool sh*t/advice/question)

Post by Blackhawk »

Nah, no helpful neighbors, but a former D&D buddy in town has offered to help. I just don't like asking for favors. Like I said, it was more of a vent than an attempt at a solution.
(˙pǝsɹǝʌǝɹ uǝǝq sɐɥ ʎʇıʌɐɹƃ ʃɐuosɹǝd ʎW)
User avatar
RMC
Posts: 6739
Joined: Wed Oct 13, 2004 1:49 pm
Location: Elyria, Ohio
Contact:

Re: Home Projects (upkeep/repair/mods/cool sh*t/advice/question)

Post by RMC »

I bought some of my tools, but I acquired all of my dad's tools. I bought my parents house, and I kept all of Dad's stuff, and my mother still lives with us. So I didn't have to start from scratch with tools.

I loan them out to my Brother in law all the time. And actually anyone that needs them and asks. :) I'll even go and help if you ask really nicely.
Difficulties mastered are opportunities won. - Winston Churchill
Sheesh, this is one small box. Thankfully, everything's packed in nicely this time. Not too tight nor too loose (someone's sig in 3, 2, ...). - Hepcat
User avatar
Blackhawk
Posts: 43490
Joined: Tue Oct 12, 2004 9:48 pm
Location: Southwest Indiana

Re: Home Projects (upkeep/repair/mods/cool sh*t/advice/question)

Post by Blackhawk »

So, I've got another one. I've got a 24x30 window. It is broken, as in half of the glass is gone, not cracked. I can't afford to replace it. For the last decade I've gotten by with closing the storm window rather than the interior window, but now I find that I need to move a window air conditioner to that window. The problem is that the storm window won't close when the unit is installed, leaving nothing separating the inside from the outside. That won't work, not around here, and not with a member of the family allergic to bees.

I considered covering it with a sheet of plexiglass, screwed in at the corners. The problem is that the plexiglass I'm seeing is either too small, or really expensive. I can't use 24x30, as the frame next to the glass is beveled. I'd need 26x32.

Any tricks out there that don't involved either a piece of plywood or aluminum foil?
(˙pǝsɹǝʌǝɹ uǝǝq sɐɥ ʎʇıʌɐɹƃ ʃɐuosɹǝd ʎW)
User avatar
Kraken
Posts: 43688
Joined: Tue Oct 12, 2004 11:59 pm
Location: The Hub of the Universe
Contact:

Re: Home Projects (upkeep/repair/mods/cool sh*t/advice/question)

Post by Kraken »

Window glass is cheap and your hardware store will cut it to fit. Then all you need is window putty, some glazing points, and a putty knife. Whole thing shouldn't cost but $20-ish.
User avatar
Isgrimnur
Posts: 82085
Joined: Sun Oct 15, 2006 12:29 am
Location: Chookity pok
Contact:

Re: Home Projects (upkeep/repair/mods/cool sh*t/advice/question)

Post by Isgrimnur »

You’re renting. A broken window is not your responsibility, probably even if you broke it.
It's almost as if people are the problem.
User avatar
Kraken
Posts: 43688
Joined: Tue Oct 12, 2004 11:59 pm
Location: The Hub of the Universe
Contact:

Re: Home Projects (upkeep/repair/mods/cool sh*t/advice/question)

Post by Kraken »

Funny story: A few months after we bought our (first and only) house I broke a window. With no landlord to call, I didn't know what to do, so I called our insurance company. They politely suppressed laughter and explained about the deductible, and suggested that I could do that myself. I looked up instructions in a book of home repairs (because google didn't exist yet). It was literally the first home repair I ever taught myself to do.

If you have wood-frame windows with single-pane glass, it's so easy and cheap that even 30-years-ago-me could do it. If you have a landlord, why has it been broken for a decade? Really, fixing it right is easier than whatever you're trying to MacGyver.
Post Reply